MHS'97
EIGHTH INTERNATIONAL SYMPOSIUM
ON
MICROMECHATRONICS AND HUMAN SCIENCE
October 5 - 8, 1997
Nagoya Municipal Industrial Research Institute
ADVANCED PROGRAM
Sunday, October 5
International Micro Robot Maze Contest
Location: Design Hall (Nadya Park)
13:00-15:00 Preliminaries
Category 1: Teleoperated Mountain Climbing Micro Robots
Category 2: Wireless Autonomous Mobile Robots
15:00-16:30 Finals
Category 1: Teleoperated Mountain Climbing Micro Robots
Category 2: Wireless Autonomous Mobile Robots
Monday, October 6
Location: Nagoya Municipal Industrial Research Institute
10:00-10:30 Opening Ceremony
10:30-12:00 Keynote Lecture
From Micro Field Cages for Living Cells to Brownian Pumps for
Submicron Particles
Prof. Guter Rolf Fuhr, Humboldt University zu Berlin, Germany
13:30-14:30 Plenary Lectures
Metallic Micromachined Pipettes for Miniaturized Bioanalysis
Systems
Prof. A. Bruno Frazier, The University of Utah, U.S.A.
14:30-15:30 Plenary Lectures
Present and Future of Micromechatronics
Dr. Yuichi Ishikawa, Mechanical Engineering Laboratory, AIST/MITI,
Japan
16:00-17:00 Plenary Lecture
Aerodynamic Control of a Delta-Wing Using MEMS Sensors and
Actuators
Prof. Yu-Chong Tai, California Institute of Technology, U.S.A.
Tuesday, October 7
9:10-10:00 Invited Lecture
Nano-Technologies for Head-Medium Interface in Magnetic Disk
Storages
Prof. Yasunaga Mitsuya, Nagoya University, Japan
Technical Sessions
10:20-12:00 : Session A-1: Microfabrication and Mechanical Property
Selective Laser Sintering of Metallic Powder for Microfabrication
Technology
Yash. P. Kathuria, Laser X Co., Ltd., Japan
Study on Fabrication of High Aspect Ratio Microparts Using LIGA
Process
Hiroshi Ueno, Makoto Hosaka, Osamu Tabata, Satoshi Konishi and Susumu
Sugiyama, Ritsumeikan University, Japan
Yanping Zhang, Sumitomo Heavy Industries, Ltd., Japann
Orientation Dependent Fracture Strain of Single-crystal Silicon
Beams under Uniaxial Tensile Conditions
Taeko Ando, Kazuo Sato, Mitsuhiro Shikida, Tetsuo Yoshioka and Yuji
Yoshikawa, Nagoya University, Japan
Tatsuo Kawabata, OMRON Corporation, Japan
Anisotropic Trench Etching of Si Using SF6/O2 Mixture
Yao Yahong and Zhao Yongjun, Tsinghua University, P. R.
China
10:20-12:00 : Session A-2: Microactuators and Microdevices I
Properties and Application of Jet Printed Piezoelectric PZT Film for
Actuation Purposes
Andreas Schroth, Masaaki Ichiki, Jun Akedo and Ryutaro Maeda,
Mechanical Engineering Laboratory, AIST/MITI, Japan
Makoto Tanaka, Micromachine Center, Japan
Multi-Layered Piezoelectric Bimorph Actuator
Shinichiro Kawakita, Toshiki Isogai, Nobuyuki Ohya, Nobuaki Kawahara,
Shigeyuki Akita and Tadashi Hattori, DENSO CORPORATION, Japan
New PZT Actuator Using Piezoelectric Thin Film on Parallel Plate
Structure
Hiroshi Sato, Fumihito Arai, Hidenori Ishihara and Toshio Fukuda, Nagoya
University, Japan
Hitoshi Iwata and Kouichi Itoigawa, TOKAI RIKA CO., LTD., Japan
An XYĮ Actuator Using Piezoelectric and Electromagnetic Actuators
Akihiro Torii, Haruna Kato, Kazuaki, Hayakawa and Akiteru Ueda, Aichi
Institute of Technology, Japan
13:30-14:20 Invited Lecture
Micro-machining Using Photo-polymirization and Metal Jet
Deposition
Prof. Katsumi Yamaguchi, Nagoya University, Japan
Technical Sessions
14:50-16:55 : Session B-1: Bio-Medical Applications
Cell-free mRNA Translation in a Microbiochemical Reactor
Kazuo Hosokawa, Teruo Fujii, Takahiko Nojima and Isao Endo, The
Institute of Physical and Chemical Research(RIKEN), Japan
Shuichi Shoji and Akira Yotsumoto, Waseda University, Japan
Development of Artificial Larynx with PZT Ceramics as Sound
Source
Katsutoshi Ooe, Nagoya University, Japan
Tsuyoshi Nishisaka, Japan Advanced Institute of Science and Technology,
Japan
In Vivo Measurement and Visualization of Fine Motion without
Invension by Processing High-frame-rate Echograms
Kohji Masuda, Nagoya University, Japan
Ken Ishihara, Osaka National Hospital, Japan
Toshiaki Nagakura, Suzuka University of Medical Science & Technology,
Japan
Shape Memory Alloy Bending Actuator for Catheter with Movable Link
and Guide Wires
Myoung-Soon Kim, Seung-Ki Lee and Sang-Hoon Lee, Dankook University,
Korea
A Novel Centrifugal Miniature Pump and Its Medical Application
Cai Hainan, Zhou Zhaoying, Li Yong, Hu Min and Ye Xiongying, Tsinghua
University, P. R. China
14:50-16:55 : Session B-2: Microactuators and Microdevices II
Developing Intelligent Micro-mechanisms
J.D. Nicoud and O. Matthey, Swiss Federal Institute of Technology,
Switzerland
In-pipe Operation Microrobots Based on the Screw Principle:
Development of a Prototype for Running in Long and Bending Pipes
Iwao Hayashi and Nobuyuki Iwatsuki, Tokyo Institute of Technology, Japan
Makoto Ogata, Mitsubishi Motor Corporation, Japan
Katsumi Nakamura, Kansei Corporation, Japan
Precise Positioning of a Micro Conveyor based on Superconducting
Magnetic Levitation
Tetsuhiko Iizuka and Hiroyuki Fujita, The University of Tokyo,
Japan
Design of Micro-Hand with Two Magnetic Levitated Fingers
Tatsuya Nakamura and Ichiyo Ando, Tokyo Metropolitan University,
Japan
Micro Resonator Using Electromagnetic Actuator for Tactile
Display
Hideyuki Morita, Toshio Fukuda, Fumihito Arai, Hidenori Ishihara and
Hideo Matsuura, Nagoya University, Japan
Wedneseday, October 8
Technical Sessions
9:10-12:05 : Session C-1: Micromanipulation and Control
Physical Limit and Information Bounds of Micro Control: Part 1.
Quantum Filters and Non-Demolition Measurements
S. V. Ulyanov and Ichiro Kurawaki, YAMAHA MOTOR CO., LTD., Japan
Fumihito Arai and Toshio Fukuda, Nagoya University, Japan
Kazuo Yamafuji, University of Electro-Communications, Japan
G. G. Rizzotto, SGS-THOMSON Microelectronics, Italy
Screening of a Single E. Coli in Microchannel by Electric Field and
Laser Tweezer
Keisuke Morishima, Fumihito Arai, Toshio Fukuda and Kenichi Yoshikawa,
Nagoya University, Japan
Tsuyoshi Nishisaka, Japan Advanced Institute of Science and Technology,
Japan
Two-Dimensional Acoustic Micromanipulation Using a Line-Focused
Transducer
Teruyuki Kozuka, Toru Tuziuti and Hideto Mitome, National Industrial
Research Institute of Nagoya(AIST/MITI), Japan
Toshio Fukuda, Nagoya University, Japan
A Remote Micro-Manipulator for Teleoperation Using Magnetic
Levitation
Mir Behrad Khamesee, Norihiko Kato, Shuxiang Guo and Kazuki Mizutani,
Mie University, Japan
Tatsuya Nakamura, Tokyo Metropolitan University, Japan
Mechanism and Driving Method of Inertial Driven Micromanipulator
Naoki Mitsumoto, Takashi Kaneko and Nobuaki Kawahara, DENSO
CORPORATION, Japan
Development of a Micro Force Sensor for Conduit Guided Wire and Its
Application to Micro Master-Slave Systems
Seiji Shimizu, Katsutoshi Kuribayashi and Masahiro Asari, Yamaguchi
University, Japan
Tetsuo Ueda, Central Engineering Co., Ltd., Japan
Dynamic Analysis of a 6-DOF Serial-Parallel Micromanipulator
Wang Shoujio, Zong Guanghua and Bi Shushong, Beijing University of
Aeronautics & Astronautics, P. R. China
9:10-12:05 : Session C-2: Microactuators and Microdevices III
Optical Multi-Transmission System Using Pyroelectric and
Photorestric Element
Hidenori Ishihara and Toshio Fukuda, Nagoya University, Japan
An Artificial Fish Robot Using ICPF Actuator
Shuxiang Guo, Kazuaki Wakabayashi and Norihiko Kato, Mie University,
Japan
Toshio Fukuda, Nagoya University, Japan
Tatsuya Nakamura, Tokyo Metropolitan University, Japan
Keisuke Oguro, Osaka National Research Institute, AIST, Japan
Millimeter-sized Shape Memory Alloy Bending Actuator Using Buckling
of the Beam
Kwang-Ho Lee and Seung-Ki Lee, Dankook University, Korea
Dynamic Characteristics of Bias-type and Differential-type Shape
Memory Alloy Actuator
Seung-Woo Na and Seung-Ki Lee, Dankook University, Korea
A Micromachined Single-Crystal Silicon Flow Sensor with a Cantilever
Paddle
Lian Zhang, Tsinghua University, P. R. China
A Novel Thermally-actuated Silicon Micropump
J. Zou, X. Y. Ye, Z. Y. Zhou and Y. Yang, Tsinghua University, P. R.
China
Tensile Test of Polysilicon Microstructure
X. Q. Lu, X. Y. Ye and Z. Y. Zhou, Tsinghua University, P. R.
China
Symposium Information
Exhibition : Micromechatronics Display
October 6th - 8th at Nagoya Municipal Industrial Research Institute
Language : English
(simultaneous interpretation is available on October 6th)
Registration Fee:
20,000 yen includes Proceedings and others
10,000 yen for students
Conference Site :
October 6th - 8th : Nagoya Municipal Industrial Research Institute
3-4-41, Rokuban, Atsuta-ku, Nagoya 456, Japan
Take the subway (Higashiyama Line) from JR Nagoya Station to "Sakae"
Station (or "Hisaya-Odori" Station on the Sakura-Dori Line). Transfer to
the Meijo Line, bound for Nagoya Port, and
get off at "Rokubancho" Station. Or take the subway (Meijo Line, bound for
Nagoya Port) from Kanayama Station to "Rokubancho" Station. Conference
Site is about 5
minutes walk from the Station.
October 5th Design Hall in Nadya Park Design Center Building 3F
3-18-1, Sakae, Naka-ku, Nagoya, 460, Japan
A 8-minute walk from Sakae subway station on the Higashiyama and Meijo Lines.
A 5-minute walk from Yabacho subway station on the Meijo Line.
For Registration, please contact:
The Chubu Industrial Advancement Center
Nagoya Sakae Building 10F
5-1, Buhei-cho, Higashi-ku, Nagoya, 461, Japan
Tel: +81-52-961-7650 Fax: +81-52-961-7670
For information regarding the Symposium, Exhibition, and International
Micro Robot Maze Contest, please contact:
Secretariat, MHS'97 c/o Inter Group Corporation
Sakae East Building 4-2-7, Sakae, Naka-ku, Nagoya, 460 Japan
Tel : +81-52-263-6261 Fax: +81-52-263-6298
E-mail: ignagoya@po.iijnet.or.jp
Designed by H. Ishihara, Aug. 7, 1997